清達光電北京銷售處：
聯系人：劉小姐,李小姐，王小姐
Tel：010-62000662，62051209
Fax：010-82036512
Mobile：13701081790
Email：bjqingda@126.com
Web：www.tsingtek.com
聯系人：劉小姐,李小姐，王小姐
Tel：010-62000662，62051209
Fax：010-82036512
Mobile：13701081790
Email：bjqingda@126.com
Web：www.tsingtek.com
QQ：453189731
微信：13701081790
地址：北京市海淀區花園東路32號花園公寓A402室
文章詳情
清達光電12832點陣OLED顯示屏示例程序(SSD1305控制器示例程序）
日期：2025-04-25 22:27
瀏覽次數：3103
摘要：清達光電為您提供多種OLED顯示屏，詳情可以QQ 453189731 或者13701081790 劉小姐
---------------------------------------------------------------------------------------------------------------
清達光電12832點陣OLED顯示屏示例程序(SSD1305控制器示例程序）如下：
(基于*基本的51單片機）
#include <reg52.h>
#include <intrins.h>
#include <math.h>
#include <stdio.h>
#define lcddata P1
#define uchar unsigned char
#define uint unsigned char
...
清達光電為您提供多種OLED顯示屏，詳情可以QQ 453189731 或者13701081790 劉小姐
---------------------------------------------------------------------------------------------------------------
清達光電12832點陣OLED顯示屏示例程序(SSD1305控制器示例程序）如下：
(基于*基本的51單片機）
---------------------------------------------------------------------------------------------------------------
清達光電12832點陣OLED顯示屏示例程序(SSD1305控制器示例程序）如下：
(基于*基本的51單片機）
#include <reg52.h>
#include <intrins.h>
#include <math.h>
#include <stdio.h>
#define lcddata P1
#define uchar unsigned char
#define uint unsigned char
#define I80
sbit RW=P3^1;
sbit E=P3^3;
sbit _WR=P3^1;
sbit _RD=P3^3;
sbit CS=P3^4;
sbit DC=P3^0;
sbit RES=P3^5;
sbit SCLK=P1^0;
sbit SDIN=P1^1;
uchar code tab16[][32]={
/* 點陣：16x16
提取點陣方向：縱向
字節掉轉：是
字節方式：C語言 */
0x10,0x22,0x64,0x0C,0xC0,0x44,0x54,0x54, // 清
0x54,0x7F,0x54,0x54,0xD6,0x44,0x40,0x00,
0x04,0x04,0xFE,0x01,0x00,0x00,0xFF,0x15,
0x15,0x15,0x55,0x95,0x7F,0x01,0x00,0x00,
0x40,0x42,0xCC,0x00,0x20,0x20,0x20,0xA0, // 達
0x7F,0x20,0x20,0x20,0x30,0x20,0x00,0x00,
0x40,0x20,0x1F,0x20,0x50,0x48,0x46,0x41,
0x40,0x41,0x42,0x4C,0x58,0x60,0x20,0x00,
0x40,0x40,0x42,0x44,0x58,0xC0,0x40,0x7F, // 光
0x40,0xC0,0x50,0x48,0x46,0x64,0x40,0x00,
0x00,0x80,0x40,0x20,0x18,0x07,0x00,0x00,
0x00,0x3F,0x40,0x40,0x40,0x40,0x70,0x00,
0x00,0x00,0xC0,0x40,0x40,0x40,0x7F,0x48, // 點
0x48,0x48,0x48,0xE8,0x4C,0x08,0x00,0x00,
0x80,0x40,0x37,0x04,0x14,0x64,0x04,0x14,
0x24,0x64,0x04,0x17,0x20,0xC0,0x00,0x00,
0x10,0x22,0x64,0x0C,0x80,0x04,0xC4,0x34, // 液
0x05,0xC6,0xBC,0x24,0x24,0xE6,0x04,0x00,
0x04,0x04,0xFE,0x01,0x02,0x01,0xFF,0x42,
0x21,0x16,0x08,0x15,0x23,0x60,0x20,0x00,
0x00,0x00,0x00,0x00,0xFF,0x49,0x49,0x49, // 晶
0x49,0x49,0xFF,0x00,0x00,0x80,0x00,0x00,
0x00,0xFF,0x49,0x49,0x49,0x49,0xFF,0x00,
0xFF,0x49,0x49,0x49,0x49,0xFF,0x01,0x00,
0x10,0x10,0xD0,0xFF,0x94,0x14,0xE4,0xBF, // 模
0xA4,0xA4,0xA4,0xBF,0xF4,0x26,0x04,0x00,
0x04,0x03,0x00,0xFF,0x08,0x89,0x8B,0x4A,
0x2A,0x1E,0x2A,0x2A,0x4B,0xC8,0x48,0x00,
0x20,0x20,0x20,0xFF,0x20,0x20,0x10,0x10, // 塊
0xFF,0x10,0x10,0x10,0xF8,0x10,0x00,0x00,
0x08,0x18,0x08,0x0F,0x84,0x46,0x22,0x1A,
0x07,0x0A,0x12,0x22,0x43,0xC2,0x42,0x00,
};
void uDelay(unsigned char l)
{
while(l--);
}
void delay(unsigned char n)
{
unsigned char i,j,k;
for(k=0;k<n;k++)
{
for(i=0;i<131;i++)
{
for(j=0;j<15;j++)
{
uDelay(80);
}
}
}
}
#ifdef M68 // 8-bit 68XX Parallel
void Writecom(unsigned char Data)
{
DC=0;
CS=0;
RW=0;
E=1;
lcddata=Data;
E=0;
RW=1;
CS=1;
DC=1;
}
void Writedata(unsigned char Data)
{
DC=1;
CS=0;
RW=0;
E=1;
lcddata=Data;
E=0;
RW=1;
CS=1;
DC=1;
}
#endif
#ifdef I80 // 8-bit 80XX Parallel
void Writecom(uchar com)
{
DC=0;
CS=0;
_WR=0;
_nop_();
lcddata=com;
_nop_();
_WR=1;
_nop_();
_nop_();
CS=1;
DC=1;
}
void Writedata(uchar dat)
{
DC=1;
CS=0;
_WR=0;
_nop_();
lcddata=dat;
_nop_();
_WR=1;
_nop_();
_nop_();
CS=1;
DC=1;
}
uchar Readcom()
{
uchar com;
DC=0;
CS=0;
lcddata=0xff;
_RD=0;
_nop_();
_nop_();
com=lcddata;
_RD=1;
_nop_();
_nop_();
CS=1;
DC=1;
return com;
}
uchar Readdata()
{
uchar dat;
DC=1;
CS=0;
lcddata=0xff;
_RD=0;
_nop_();
_nop_();
dat= lcddata;
_RD=1;
_nop_();
_nop_();
CS=1;
DC=1;
return dat;
}
#endif
#ifdef SPI // 4-wire SPI
void Writecom(unsigned char Data)
{
unsigned char i;
CS=0;
DC=0;
for (i=0; i<8; i++)
{
SCLK=0;
SDIN=(Data&0x80)>>7;
Data = Data << 1;
SCLK=1;
}
DC=1;
CS=1;
}
void Writedata(unsigned char Data)
{
unsigned char i;
CS=0;
DC=1;
for (i=0; i<8; i++)
{
SCLK=0;
SDIN=(Data&0x80)>>7;
Data = Data << 1;
SCLK=1;
}
DC=1;
CS=1;
}
#endif
/**********************
主程序
************************/
void main(void)
{
INT();
clear(0xff);
delay(1);
clear(0x55);
delay(1);
clear(0xaa);
delay(1);
reset(0x55);
delay(1);
reset(0xaa);
delay(1);
clear(0x00);
display_8(0,2);
display_8(0,3);
display_16(0,0);
while(1);
}
更詳細程序請聯系QQ 453189731索取
更詳細程序請聯系QQ 453189731索取